Description:
CE certificate
Advanced in domestic , high technology product
Vertical two channels, bandwidth of each channel is
200MHz, 100MHz, 60MHz, 40MHz, 25MHz;
Max. real time sampling 1GSa/s, equivalent sampling 50GSa/s;
High LCD, adjustable intensity;
Support communication interface. RS232, USB (main, sub), RJ45 LAN;
Delay sweep, shorten time;
Measure Multi-waveform parameters automatically, record and recall waveform;
SFFT, differential coefficient, integral and FFT analysis;
Multi- language menus display, help to display information;
Input attenuation 2mV/div~50V/div, easy to measure big signal;
Display date and time;
Auto-track: Sweep auto-track, vertical auto-track, completely auto-track;
Edge, video, pulse width, slope, alt. etc;
Pass/Fail measure;
Kinds of correction signals output frequency (1K, 10K, 100K).
Details:
|
Vertical system |
22005
22010 |
21005
21010 |
20605
20610 |
20405
20410 |
20205
20210 |
|
Channel |
CH1, CH2, analog-digital switch, 8 bit resolution |
|
Vertical deflexion |
2mV/div-50V/div, 1-2-5 14 steps |
|
Analog bandwidth |
200MHz |
100MHz |
60MHz |
40MHz |
25MHz |
|
Single bandwidth |
DC~200MHz(22010), DC~100MHz(21005, 21010, 22005), DC~60MHz(20605, 20610), DC~40MHz(20405, 20410), DC~25MHz(20205, 20210) |
|
Expansion bandwidth (2mV/div) |
DC~40MHz(200MHz product) -3dB
DC~20MHz(<100MHz product) -3dB |
|
Analog frequency bandwidth limit, classic |
40MHz(200MHz product) -3dB
20MHz(<=100MHz product) -3dB |
|
Rising time |
<=1.8ns |
<=3.5ns |
<=5.8ns |
<=8.7ns |
<=14ns |
|
LF limit (AC coupling) |
<=10Hz (on BNC) |
|
Probe attenuation coefficient |
1×, 10×, 100× |
|
Dynamic range |
>=12div (screen central baseline±6div) |
|
Input impedance |
Resistance(1±2%)MΩ capacitance (20±5)pF |
|
Max input voltage |
400V(DC+ACpeak) frequency<=400Hz(when impedance is 1MΩ) |
|
Allowed deflexion parameters error |
<=±(3%+1pixel)(>5mV/div)
<=±(4%+1pixel)(2mV/div) |
|
Common-mode rejection ratio |
>=20dB at 50MHz |
|
Open circuit noise |
<=0.4div at 5mV/div step |
|
Float |
Short-term float: <=0.5div Long-term float: <=1div |
|
Working mode |
CH1, CH2, CH1±CH2, CH1×CH2, CH1/CH2, FFT |
|
Probe |
|
Probe |
1×location 10×location |
|
Bandwidth |
DC~6MHz DC~DC~full bandwidth |
|
Attenuation |
1:1 10:1 |
|
Compensation |
10pF~35pF oscilloscope 1MΩ input impedance |
|
Input impedance |
(1±2%) MΩ (10±2%) MΩ |
|
Input capacitance |
About 100pF about 15pF |
|
Horizontal system |
|
Sampling |
Real-time Max. sampling rate 05 series is 500MSa/s, 10 series is 1GSa/s
Equivalent Max. sampling rate is 50GSa/s |
|
Waveform interpolation |
Sin(x)/x |
|
Record length |
4kB/CH can expand to 256MB or 512MB |
|
Horizontal working mode |
Main sweep, Main sweep+delay expansion sweep, X-Y |
|
Sweep time base |
1-2-5step 50s/div~1ns/div(200MHz):50s/div~5ns/div(100MHz)
50s/div~10ns/div(60MHz, 40MHz):50s/div~20ns/div(25MHz) |
|
Sampling rate and delay time precision |
±100ppm |
|
X-Y characteristic |
X(CH1) frequency bandwidth DC~vertical full bandwidth -3dB phase error: <=3° at 5MHz |
|
Trigger |
|
Trigger Source |
CH1, CH2, EXT, city electricity |
|
Ext.trigger input impedance |
Resistance(1±2%)MΩ capacitance:(20±5)pF |
|
Max.input voltage |
400V(DC+ACpeak)<=1kHz |
|
Trigger sensitivity |
Internal:>=1div(frequency upper limit to 40MHz), >=2div( >40MHz), >=2div, TV-V, TV-H Video trigger
External:>=100mVp-p frequency upper limit to 40MHz, >=200mVp-p (frequency is>40MHz), 200mVp-p, TV-V, TV-H video trigger |
|
Auto –trigger range |
100Hz~100MHz square-wave signal |
|
Trigger level range |
Internal trigger:±4div external trigger: ±1.6V |
|
Low frequency inhibition |
Frequency about < 100KHz will be inhibited |
|
High frequency inhibition |
Frequency about > 100KHz will be inhibited |
|
Trigger mode |
Edging trigger, pulse trigger, video trigger, slope trigger |
|
Measure |
|
Cursor measure |
Measure voltage error between cursors△V
Measure time error between cursors△T
Measure frequency between cursors 1/△T |
|
Auto-measure |
Voltage parameters: p-p, amplitude, Max, Min, top, bottom, average, root-mean-square value, overshot, pre-overshot.
Time parameters: frequency, cycle, rising time, fall time, +pulse width, -pulse width, +duty, -duty, delay1-2, dylay1-2 |
|
Display |
|
Display screen |
5.7inch, color
Pixel:320(horizontal)×234(vertical)dots. Lightness: typical value>=80cd/m² |
|
Pixel of waveform display region |
Vertical:200dot(Full), 25dot/div
Horizontal:250dot(full), 25dot/div |
|
Display type |
Dot, vector |
|
Display mode |
Normal
Smooth
Average: Average times 2n(n=1~8 optional)
Peak value: When sweep time base is 20ms/div~2μs/div, includes envelope and burr capture.
Persistence: Time adjustment range: close, 100ms, 500ms, 1s, 2s, 5s, 10s unlimited. |
|
Calibrate signal |
|
Amplitude |
0.5Vp-p<=±1% |
|
Frequency |
1KHz, 10KHz, 100KHz square-wave |
|
Output interface |
|
Output interface |
USB, RS232, RJ45 LAN (optional) |
|
Storage |
|
Waveform storage |
10 teams |
|
Setup storage |
10 teams |
|
Mechanical characters |
|
Power voltage |
AC100V~240V ±10% 45Hz~440Hz |
|
Power |
About 25w |
|
Dimension and weight |
300mm×150mm×130mm 2.5kg | |
86-10-66068076 
86-10-66022112
wangwang@moe.edu.cn
Products
