Mesh board design for components mounting facilitates operating and replacing components, and features expansion ability;
|
The system is 3-phase 4-wire AC voltage operated, and cost effective.
|
Essential safety system includes voltage type and current type leakage protection, monitoring and short-circuit protection for each voltage output, and fully protection for all instruments
|
The workbench allows two trainees operation simultaneously.
|
The workbench features two independent power supplies controlled by start/stop buttons and emergency stop button, short-circuit protection is available for the power output.
|
The system provides tool set and all required electric components.
|
|
| | |
Low voltage circuit breaker
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
Stainless steel self tapping screw
| | |
3-phase squirrel-cage asynchronous motor
| | |
|
Direct starting control of 3-phase asynchronous motor
|
Contactor jogging control of 3-phase asynchronous motor
|
Contactor self-lock control of 3-phase asynchronous motor
|
Y-∆starting automatic control
|
Switch revisable control of 3-phase asynchronous moto
|
Contactor interlocked reversible control of 3-phase asynchronous motor
|
Pushbutton interlocked reversible control of 3-phase asynchronous motor
|
Double interlocked reversible control of 3-phase asynchronous motor
|
Multi-location control of 3-phase asynchronous motor
|
Automatic circulation motion control of worktable
|
Wiring for fluorescent lam
|
Two analog AC voltmeters (range: 0~500V, accuracy: 1.0%)
|
Two analog AC ammeters (range: 0~5A, accuracy: 1.0%, complete with over-range alarm, indication, and power cutting off)
|
DC voltage: 200mV/2V/20V/200V/1000V ±(0.5%+3)
|
AC voltage: 2V/20V/200V/750V ±(0.8%+5)
|
DC current: 20uA/2mA/200mA/20A ±(1.5%+3)
|
AC current: 2mA/20mA/20A ±(1.5%+5)
|
Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+5)
|
Capacitance: 20nF/200nF/20uF/200uF ±(4.0%+10)
|
Frequency: 20kHz ±(1.5%+25) temperature: -40oC-1000oC ±(0.75%+3)
|
Other functions: diode test, transistor test, continuity buzzer, low battery indication, data hold, auto shutdown, resettable fuse protection, shockproof protection, input impedance 10MΩ, sampling rate: 3 S/s, AC frequency response: 40
|
CONFIGURATION:(As per one set)
|
| |
Tools and connecting leads:
| |
User's manual and other technical materials:
| |